Synthetic Hydraulic Oil

Duragard® Arctic Blue Low Temp Hydraulic Oil

Product Code: DURARCBLUxx
AVAILABLE IN: 2.5 gal JUG, 5 gal PAIL, 16 gal KEG, 30 gal DRUM, 55gal DRUM, and BULK (in selected areas)


2.5 gal Jug

5.0 gal Pail
16 gal KEG, 30gal DRUM, 55gal DRUM, and BULK (in selected areas)


Download

     

Specifications

INSPECTION INFORMATION TEST METHOD TYPICAL VALUE
Color Blue
Gravity, ºAPI ASTM D287 21
Viscosity @ 40°C cSt ASTM D445 22
Viscosity @ 100°C cSt ASTM D445 4.8
Viscosity @ 100°C SUS ASTM D2161 106
Viscosity @ 210°C SUS ASTM D2161 42
Viscosity Index ASTM D2270 145
Pour Point °C (°F) ASTM D5950 -65ºC (-85ºF)
Flash Point °C (°F) ASTM D92 160ºC (320ºF)
Dielectric Strength*, kv ASTM D877 28
ASTM Rust Test ASTM D665 Pass
Foam Test ASTM D892 Pass
Turbine Oil Stability Test, hrs 2500
' At point of manufacture
Typical test data average values only, minor variations which do not affect product performance are to be expected during normal manufacturing.


Duragard® Diamond Synthetic® Arctic Blue Low Temp Hydraulic Oil
NAPTHINIC / PARAFINIC BLENDED ALL WEATHER 10wt HYDRAULIC OIL

Duragard® Diamond Synthetic® Arctic Blue Low Temp Hydraulic Oil is formulated with high viscosity index (HVI) base oils and a precise balance of addititives to deliver excellent low temperature properties, oxidation control, wear protection, resistance to rust, corrosions and foaming, and protect against the formuation of deposits and sludge. Suitable for use in arctic conditions.

Duragard® Diamond Synthetic® Arctic Blue Low Temp Hydraulic Oil is designed to lubricate the most demanding on highway, as well as off-highway low temperature applications. This product is recommended for bucket trucks (cherry pickers), snow plows, garbage trucks, industrial and mobile equipment, and most hydraulic equipment where there is a wide range of operating temperatures and reliability is critical.

Duragard® Diamond Synthetic® Arctic Blue Low Temp Hydraulic Oil has a high dielectric strength* for use in electrical service or tree trimming bucket trucks. Sealed containers of Arctic Blue Hydraulic oil are guaranteed to have a minimum dielectric strength of no less than 28 KV when packaged. This is important for boom trucks and man lifts that may come into contact with an external power source. Dielectric strength is extremely sensitive to handling conditions, contamination, and humidity

Benefits:

  • * High dielectric strength* for use in electric service bucket trucks.
  • * Excellent protection in harsh temeratures and artic conditions.
  • * Outstanding anti-friction and anti-wear properties.
  • * Superior demulsibility to ease water removal.
  • * Promotes extended drain interval and reduced operating costs.
  • * Fluid must be kept clean and free of water contamination in order to maintain dielectric strength.

This product meets, or exceeds the requirements similar to the following manufacturers and global specifications:

Cincinnati Milacron FMC
Denison Bosch Rexroth
Vickers DIN

Hydraulic System Applications:

Bucket trucks (cherry pickers) Public utility vehicles
Snowplows Fire fighting lift trucks
Garbage trucks Construction equipment operating in cold climates
Industrial and mobile equipment Cranes and aerial lifts
Surface mining equipment Equipment requiring a 10WT low temp hydraulic fluid

Copyright © 2024  Advantage Distributing & Lubricants, LLC
Proposition 65
WARNING: Products may expose you to chemicals which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.P65Warngings.ca.gov.
For specific product risks check the manufacturer’s SDS Section 15: Regulatory information.