Duragard® Diamond Plate® SAE 75W-140 100% Synthetic Gear Lubricant

Product Code: DUR75/140
AVAILABLE IN: 2.5 gal JUG, 5 gal PAIL, 16 gal KEG, 30 gal DRUM, 55gal DRUM, and BULK (in selected areas)

Download

     

Specifications

INSPECTION INFORMATION

TEST METHOD

TYPICAL VALUE

Brookfield Viscosity at -40°C, cP

ASTM D2983

127,000

Color

ASTM D1500

1

Flash Point °F ASTM D92 450
Flash Point °C ASTM D92 232
Gravity, ºAPI

ASTM D287

34.31

Pour Point °C (°F)

ASTM D5950

-51ºC (-60ºF)

Specific Gravity @60°F (15.6°C)

ASTM D4052

0.8534

Viscosity @ 40°C cSt

ASTM D445

171.8

Viscosity @ 100°C cSt

ASTM D445

27.64

Viscosity Index

ASTM D2270

200

Typical test data average values only, minor variations which do not affect product performance are to be expected during normal manufacturing.

Duragard® Diamond Plate® SAE 75W-140 100% Synthetic Gear Lubricant is specially formulated with only the finest quality synthetic base oils, premium extreme pressure additives, rust and corrosion preventatives, and anti-foam agents to deliver unsurpassed protection and performance.

Duragard® Diamond Plate® SAE 75W-140 100% Synthetic Gear Lubricant is specially formulated for multipurpose, extreme pressure applications including conventional differentials, gear boxes, limited slip rear axles, manual transmissions, hypoid, spiral bevel, and worm gear axles. It is recommended for passenger car, bus,farm equipment, off-road construction equipment, highway truck but can also be used in manual transmissions or the differential (hypoid) gear oil specifications from all domestic and foreign manufacturers, and in axles where an API GL-5 lubricant is recommended.

Duragard® Diamond Plate® 100% Synthetic SAE 75W-140 Gear Lubricant is recommended for passenger car, bus, farm equipment, off-road construction equipment, and on highway truck hypoid, spiral bevel, and worm gear axles, but can also be used in manual trans-missions or the differential (hypoid) gear oil specifications from all domestic and foreign manufacturers such as GM, Ford and Fiat Chrysler Automobiles, LLC (FCA US, LLC). Can also be used in axles where an API GL-5 or GL-4 lubricant is recommended.

Benefits:

  • * Multipurpose advanced synthetic GL-5 lubricant.
  • * Excellent protection in harsh temeratures.
  • * Outstanding anti-friction and anti-wear properties.
  • * Superior demulsibility to ease water removal.
  • * Helps prevent foaming, rust, and corrosion.
  • * Smooths and quiets operation.
  • * Promotes extended drain interval and reduced operating costs.

This product meets, or exceeds the requirements similar to the following manufacturers and global specifications:

AGMA 9005-E02, 250.03, 250.04, 251.02, No. 4 Meets Requirements
AIST/US Steel 224 Meets Requirements
API GL-5 Meets Requirements
ArvinMeritor (Rockwell International) 076-E Meets Requirements
CEC L-45-A-99 Meets Requirements
Mack GO-J, GO-H, GO-G Meets Requirements
MT-1 Meets Requirements
SAE J2360, MIL-2105E/F Meets Requirements
Limited Slip Suitable for Use
**Consult the individual manufacturer specification requirements for recommendations and use.

Copyright © 2020  Advantage Distributing & Lubricants, LLC
Proposition 65
WARNING: Products may expose you to chemicals which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.P65Warngings.ca.gov.
For specific product risks check the manufacturer’s SDS Section 15: Regulatory information.