Gear Lubricant

Duragard® 100% Synthetic Industrial Eurus 46 Compressor Oil

Product Code: DUREURUS46
AVAILABLE IN: 2.5 gal JUG, 5 gal PAIL, 30 gal DRUM, 55 gal DRUM, and BULK (in selected areas)

2.5 gal Jug

5 gal Pail

16 gal KEG, 30gal DRUM, 55gal DRUM, and BULK (in selected areas)


Download

     

Specifications

INSPECTION INFORMATION TEST METHOD TYPICAL VALUE
Viscosity @ 40°C cSt ASTM D445 44.1
Viscosity @ 100°C cSt ASTM D445 7.1
Viscosity Index ASTM D2270 122
Flash Point °C (°F) ASTM D93 197ºC (387ºF)
Pour Point °C (°F) ASTM D5950 -42ºC (-43.6ºF)
Color Orange Liquid
Copper Corrosion 24 hours @ 100ºC ASTM D130 1B
Rust Chracteristics Proc B ASTM D665 Pass
Specific Gravity 15ºC ASTM 1298 0.8676
Typical test data average values only, minor variations which do not affect product performance are to be expected during normal manufacturing.

Duragard® 100% Synthetic Industrial Eurus 46 Compressor Oil is a supreme performance air compressor lubricant primarily intended for the lubrication of severe duty rotary screw and vane air compressors operating under severe conditions including high final compression temperatures or where extended oil drain intervals are desired.

Duragard® 100% Synthetic Industrial Eurus 46 Compressor Oil is very effective in screw type compressors with oil injection cooling; compressors with a history of excess oil degradation, poor valve performance or deposit formation. It is particularly effective for continuous high temperature operation with discharge temperatures up to 200°C and compressor systems with critical gears and bearings. It is not for air compressors used in breathing air applications.

Benefits:

  • * Outstanding thermal and oxidation stability help to provide extended oil drain interval and reduce maintenance downtime.
  • * Excellent varnish and sludge control helps to deliver cleanliness and extended compressor oil life.
  • * High performance synthetic base stocks with high viscosity index enables wide temperature range capability and effective lubrication at high temperatures.
  • * High load carrying capability protects equipment and extends life, helps minimize unexpected downtime and extend service periods.
  • * Exceptional resistance to rusting and corrosion, very good antiwear, demulsibility, foam control and air release and multi-metal compatibility.
  • * Excellent water separability helps reduce carryover to downstream equipment, reduce sludge formation in crankcases and discharge lines, helps reduce blockage of coalescers, coolers and less potential for emulsion formation.
  • * Primarily for rotary screw and vane air compressor, very effective in screw type compressors with oil injection cooling; compressors with a history of excess oil degradation, poor valve performance or deposit formation.
  • * Compressors operating under severe conditions, particularly effective for continuous high temperature operation with discharge temperatures up to 200ºC.
  • * Compressor systems with critical gears and bearings.
  • * Compatible with all metals used in compressor construction and with conventional mineral oil-based air compressor oils but mixture with other oils may detract from the total performance.
  • * Not for air compressors used in breathing air applications.

Copyright © 2024  Advantage Distributing & Lubricants, LLC
Proposition 65
WARNING: Products may expose you to chemicals which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.P65Warngings.ca.gov.
For specific product risks check the manufacturer’s SDS Section 15: Regulatory information.