Synthetic Blend or 100% Synthetic Engine Oil

Duragard® Diamond Plate® dexos1 100% Synthetic SAE 5W-30 Motor oil

Product Code: DURDEXOS1-5/30XXX
AVAILABLE IN: 2.5 gal JUG, 5 gal PAIL, 16 gal KEG, 30 gal DRUM, 55gal DRUM, and BULK (in selected areas)

2.5 gal Jug

5 gal Pail

16 gal KEG, 30gal DRUM, 55gal DRUM, and BULK (in selected areas)


Download

     

Specifications

INSPECTION INFORMATION TEST METHOD TYPICAL VALUE
Gravity, ºAPI ASTM D287 34.15
Specific Gravity @60ºF (15.6ºC) ASTM D4052 0.8542
Viscosity @ 40°C cSt ASTM D445 63.95
Viscosity @ 100°C cSt ASTM D445 10.93
Viscosity Index ASTM D2270 163
Pour Point °C (°F) ASTM D5950 -45ºC (-49°F)
Cold Cranking Simulator at (°C), cP ASTM D5293 5100 (-30)
High Temperature / High Shear Vis at 100°C ASTM D6616 7.15
High Temperature / High Shear Vis at 150°C ASTM D5481 3.2
Noack Volatility, % loss ASTM D6375 10.5
Color ASTM D1500 2.5
Zinc, wt. % ASTM D5185 0.085
Phosphorus, wt. % ASTM D5185 0.079
Calcium, wt. % ASTM D5185 0.214
Sulfur, wt. % ASTM D4951 0.252
Boron, wt. % ASTM D5185 0.023
Molybdenum, wt. % ASTM D5185 0.0079
Sulfated Ash, wt. % ASTM D874 0.92
Nitrogen, wt. % ASTM D4629 0.102
Pumping Viscosity at (°C), cP ASTM D4684 18,400 (-35)
Shear Stability ASTM D6278 9.43
Foam Seq. I(Tendency/Stability), mL ASTM D892 (Opt. A) 0/0
Foam Seq. II(Tendency/Stability), mL ASTM D892 (Opt. A) 0/0
Foam Seq. III(Tendency/Stability), mL ASTM D892 (Opt. A) 0/0
High Temperature Foaming, Static Foam ASTM D892 (Opt. A) 0/0
TBN, mgKOH/g ASTM D2896 7.9
Typical test data average values only, minor variations which do not affect product performance are to be expected during normal manufacturing.

Duragard® Diamond Plate® dexos1 100% SYNTHETIC SAE 5W-30 is a full synthetic formulation using the most advanced additive technology available to meet the latest fuel economy standards while exceeding the specifications for wear control, piston deposits, cleanliness, varnish and sludge, oxidation control, and emission system and seal compatibility. These specifications are far more stringent than ILSAC GF-5 specification.

Duragard® Diamond Plate® dexos1 100% SYNTHETIC SAE 5W-30 is an API SN and ILSAC GF-5 Resource Conserving Performance Motor Oil and is approved and licensed by General Motors for worldwide warranty service for all GM gasoline engine cars and trucks where a SAE 5W-30 dexos1 is required. Duragard® dexos1 100% Synthetic SAE 5W-30 supersedes the GM 6094M and GM 4718M specifications for currant and older GM vehicles. Duragard® dexos1 is specifically designed for use in GM gasoline engines, but may be used wherever ILSAC GF-5 and API-SN 100% Synthetic SAE 5W-30 or previous specifications are called for.

Duragard® Diamond Plate® dexos1 100% SYNTHETIC SAE 5W-30 provides the highest level of engine protection available, even under the most severe operating conditions. Duragard® dexos1 5W-30 has exceptionally high viscosity that indices minimize cold weather thickening, which greatly reduces battery drain and engine wear, even at subzero startups and also provides exceptional resistance to high temperature oxidation thickening.

Benefits:

  • * Exceeds warranty requirements of engine manufacturers that require a type API SN or ILSAC GF-5 dexos1 100% Synthetic 5W-30 motor oil.
  • * Formulated to prevent engine wear. Even in the most severe GM tests Duragard® dexos1 exceeds the performance limits by 65%.
  • * Keeps pistons cleaner than GF-5 minimizing oil consumption and maintaining power and compression performance.
  • * Chemistry significantly outperforms the industry requirement, reducing engine sludge to near zero.
  • * Emission conserving protecting the car's catalyst system to help protect the environment.
  • * For use in all naturally aspirated or turbo-charged gasoline engines.

This product meets, or exceeds the requirements similar to the following manufacturers and global specifications:

GM licensed dexos1 SAE 5W-30 motor oil
API SN, and prior SM, SL, SJ, SG, SF, SE, SD, SC
ILSAC-GF-5, and prior GF-4
GM6094M, GM4718M
Chrysler MS-6395
M2C946-A, M2C929-A
For use in all naturally aspirated or turbo-charged gasoline engines

Manufactured by Warren Dist. under lic. #RB1A1104025 for Duragard Oil.

Copyright © 2018  Advantage Distributing & Lubricants, LLC