Synthetic Blend Full Engine Oil

Duragard® SAE 30WT Heavy Duty Single Grade Engine & Transmission Oil

Product Code: DUR30XX
AVAILABLE IN: 2.5 gal JUG, 5 gal PAIL, 16 gal KEG, 30 gal DRUM, 55gal DRUM, and BULK (in selected areas)

2.5 gal Jug

5 gal Pail

16 gal KEG, 30gal DRUM, 55gal DRUM, and BULK (in selected areas)


Download

     

Specifications

INSPECTION INFORMATION TEST METHOD TYPICAL VALUE
Gravity, ºAPI ASTM D287 29.77
Specific Gravity @60°F (15.6°C) ASTM D4052 0.8774
Viscosity @ 40°C cSt ASTM D445 77.57
Viscosity @ 100°C cSt ASTM D445 10.02
Viscosity Index ASTM D2270 110
Pour Point °C (°F) ASTM D5950 -30ºC (-22ºF)
Color ASTM D1500 2.5
Zinc, wt. % ASTM D5185 0.1
Phosphorus, wt. % ASTM D5185 0.0914
Calcium, wt. % ASTM D5185 0.966
Sulfur, wt. % ASTM D4951 0.231
Magnesium, wt. % ASTM D5185 0.914
Sulfated Ash, wt. % ASTM D874 1.03
Nitrogen, wt. % ASTM D4629 0.061
Nitrogen, wt. % ASTM D4629 0.102
Typical test data average values only, minor variations which do not affect product performance are to be expected during normal manufacturing.

Duragard® Diamond Plate® SAE 30WT Heavy Duty Single Grade Engine & Transmission Oil is formulated with select Group-II hydro cracked clear base oil blends that provide superior low temperature fluidity and extraordinary high temperature film strength that simply cannot be achieved using conventional mineral base oils. Various weights for mixed fleets requir¬ing performance typical of API Service Classification CF-4/CF-2, CE, CDII/SH lubricants - gasoline or diesel. They provide high detergency levels, soot dispersancy, oxidation stability, and excellent wear protection. The SAE 30wt HD Oil meets the performance requirements of typical of Allison C-4, Caterpillar TO-2 fluids, and the non-synthetic requirements typical of CD/GL-1 for Eaton / Fuller Road Ranger & Spicer / Dana transmissions.

Duragard® Diamond Plate® SAE 30WT Heavy Duty Single Grade Engine Oil is compounded from high viscosity index, specially hydro-co processed base oils combined with potent detergent-dispersants, anti-wear additives, anti-oxidants, defoamers, and pour-point depressant compounds. The superior high temperature volatility characteristics result in superior oil consumption control. Stay-in-grade shear stability enables the oil to maintain viscosity in severe high temperature and heavy load conditions. The direct benefit is extended engine and component life.

Duragard® Diamond Plate® SAE 30WT Heavy Duty Single Grade Engine Oil is formulated with less than 1.0% sulfated ash to meet the requirements typical of 2 cycle Detroit Diesel engines, and are dyed traditional amber color for visibility and leak identification.

Duragard® Diamond Plate® SAE 30WT Heavy Duty Single Grade Engine Oil is recommended for type MIL-L-2104F, MIL-L-2104E, MIL-L-2104B/C/D, and type CE/CD/CC applications.

This product meets, or exceeds the requirements similar to the following manufacturers and global specifications:

Allis Chalmers Mack Trucks EO-K/2
J.I. Case Massey Ferguson
Caterpillar 1-GZ,TO-2 Mercedes
Cummins NTC400 Minneapolis-Moline
John Deere Oliver
Ford Volvo
GM-6094-M (30/40/50) White

Copyright © 2018  Advantage Distributing & Lubricants, LLC
Proposition 65
WARNING: Products may expose you to chemicals which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.P65Warngings.ca.gov.
For specific product risks check the manufacturer’s SDS Section 15: Regulatory information.