Typical Properties | ASTM Method | Concentrate | 50/50 |
Glycols Content, mass % | GC | 93.5 | 47 |
Bittering Agent (yes/no) | -- | Yes | Yes |
Water Content, mass % | D1123 | 2 | 50.8 |
Corrosion Inhibitor System, mass % | -- | 4.5 | 2.2 |
Specific Gravity @ 60ºF | D1122 | 1.117 | 1.069 |
Flash Point | D97 | 240ºF (116ºC) | N/A |
pH | D1287 | 8.7 | 8.4 |
RA | D92 | 5.2 | 2.56 |
Storage Stability | -- | 5 years | 5 years |
Effect on Non-Metals | D1882 | No Effect | No Effect |
Cavitation Errosion Rating | D2809 | 8 min | 8 min |
Foam Test, ml/sec | D1881 | <50/3 | <50/3 |
Fluid Color | Visual | Flor Orange | Flor Orange |
Coolant/Antifreeze % 40/60 Freeze Point |
D1177 | -24ºF(-12ºC) | N/A |
Coolant/Antifreeze % 50/50 Freeze Point |
D1177 | -34ºF (-36ºC) | -34ºF (-36ºC) |
Coolant/Antifreeze % 60/40 Freeze Point |
D1177 | -62ºF (-52ºC) | N/A |
Coolant/Antifreeze % 40/60 Boil Point |
D1120 | 221ºF (105ºC) | N/A |
Coolant/Antifreeze % 50/50 Boil Point |
D1120 | 226ºF (108ºC) | 226ºF (108ºC) |
Coolant/Antifreeze % 60/40 Boil Point |
D1120 | 234ºF (112ºC) | N/A |
Ash Content | D1119 | <5.0 | <2.5 |
Chloride (mg/L) | D3634 | <25 | <25 |
Silicon Content (mg/L) | D6130 | <10 | <10 |
DefendAL® Coolant/Antifreeze (Formulated for use in vehicles requiring DEX-COOL®*) is a premium carboxylate-based Organic Acid Technology (OAT) ethylene glycol-based fluid. Specially formulated with industry-leading additives, this product provides optimum performance in vehicles requiring DEX-COOL®* (GM 6277M) coolant.
Benefits:
DefendAL® Coolant/Antifreeze (Formulated for use in vehicles requiring DEX-COOL®*) is your cooling system’s best defense.
This product meets, or exceeds the requirements similar to the following manufacturers and global specifications: **
|
|
|
All reasonable care has been taken to ensure that the information herein is accurate as of the date of posting. Freedom to use any patent owned by KOST USA, Inc. or others is not to be inferred from any statement contained herein. The test results listed are typical properties only. Formula and blending changes may results in the slight color and appearance changes.